2"x50' Titanium and Black Blended Exhaust Wrap

Made from 100% continuous basalt fiber – Black Exhaust Header Heat Wrap for Motorcycle delivers stable heat resistance up to 1000°C with a flexible 3D weave structure that hugs irregular pipe surfaces. Use it on exhaust headers, turbo manifolds, and downpipes to cut radiant heat, protect surrounding components, and maintain exhaust gas velocity.

Bulk wholesale and OEM customization (width, thickness, packaging, fiber density) are available for distributors and brand partners.

Who Needs This Exhaust Wrap?

Performance car modifiers looking to drop under-hood temperatures. Motorcycle garages wrapping custom exhaust systems. Industrial pipe contractors insulating high-temperature pipelines.

If you fit any of these, this 2"x50' Titanium and Black Blended Exhaust Wrap is built for your application.

Why Basalt Over Fiberglass?

A split-screen comparison image. The left side shows this product (clean and neat), while the right side shows standard fiberglass cloth (fuzzy and shedding fibers).

Material & Construction – What Makes This Wrap Different

100% Continuous Basalt Fiber – No Fiberglass, No Itch

This 2"x50' Titanium and Black Blended Exhaust Wrap is woven from long continuous basalt filaments sourced from natural volcanic rock. The key difference? Zero fiberglass content.

What that means for you:

No skin irritation during installation – your mechanics won't dread wrapping jobs

No performance drop-off after repeated heat-cool cycles – the material stays intact without aging, crumbling, or shedding

Longer service life compared to fiberglass-blended wraps that break down over time

3D Weave Structure – Stays Tight, Stays Put

Standard flat-weave wraps tend to loosen, sag, or shift after months of engine vibration and thermal cycling. Our proprietary 3D three-dimensional weave solves that.

The textured, flexible surface:

Conforms tightly to curved, irregular exhaust pipe contours – no gaps, no loose spots

Resists abrasion from constant engine vibration and mechanical friction

Maintains tension through repeated thermal expansion and contraction – stays wrapped tight month after month

Titanium-Black Blended Finish – Looks as Good as It Performs

The titanium-gray and black fiber blend creates a smooth matte finish after installation. It visually complements aftermarket titanium and carbon fiber components – a detail that matters to performance enthusiasts who care about engine bay aesthetics.

Where to Use This Exhaust Wrap

4 Core Benefits – What This Wrap Actually Does for You

1. Drops Under-Hood Temperatures

The thick basalt fiber layer blocks radiant heat from escaping hot exhaust pipes into the engine bay. Less heat means:

Slower aging of wiring harnesses, rubber hoses, and plastic engine covers

Longer lifespan for surrounding components

A cooler, more reliable engine bay overall

2. Sharpens Turbo Response

Heat is energy. When exhaust gas cools before reaching the turbo, it contracts and loses velocity. This wrap locks heat inside the exhaust tubes, preventing rapid cooling and volume shrinkage.

The result: steady exhaust pulse velocity reaching the turbo, which translates to improved throttle sensitivity and noticeable performance gains – especially in turbocharged applications.

3. Adds a Corrosion Barrier

The wrapped fiber layer creates a physical shield between your exhaust pipes and the outside world:

Blocks road splash

Keeps deicing salt off metal surfaces

Prevents humid air from direct pipe contact

For vehicles driven in rainy or coastal areas, this extra barrier slows surface rust and extends pipe life.

4. Professional Installation Experience

Unlike fiberglass wraps that shed irritating particles during handling, this basalt wrap keeps installation clean and comfortable – your crew will thank you.

Product Specifications

Installation Guidelines – Do It Right the First Time

Before You Start

Clean exhaust pipes thoroughly with brake cleaner or acetone

Use a wire brush to remove all surface rust – wrapping over rust traps moisture and accelerates corrosion

If pipes are heavily rusted, replace the section before wrapping

Wrapping Steps

Start wrapping from the manifold or header connection point

Maintain a ¼-inch overlap between each layer for complete heat coverage

Apply steady, moderate tension throughout – not too loose, not too tight

Secure both ends firmly with stainless steel cable ties

After Wrapping – Curing & Maintenance

Run the engine for approximately 15 minutes to cure the basalt wrap

For extended service life, apply a high-temperature silicone or ceramic sealer after the wrap cools

Re-tighten all cable ties after the first full heat cycle – thermal expansion can loosen initial tension

Safety Note

Always wear protective gloves and long sleeves during installation. While basalt fiber causes significantly less irritation than fiberglass, it's still a fibrous material – basic protection is recommended.

Frequently Asked Questions

Q1: What vehicles can use this Black Exhaust Header Heat Wrap for Motorcycle?

All of them – sedans, racing cars, SUVs, motorcycles, and industrial machinery with high-temperature exhaust manifolds or turbo pipes. Wholesale buyers can resell to local modification shops and repair garages with confidence.

Q2: Does this wrap contain fiberglass?

No. Zero fiberglass content. The entire roll is pure basalt fiber. This means less skin irritation during installation and better durability under sustained high heat compared to fiberglass-blended wraps.

Q3: Can I wrap pipes with surface rust?

We don't recommend it. Wrapping over rust locks moisture against the metal and accelerates corrosion. Always remove all rust before wrapping. If pipes are severely corroded, replace those sections first.

Q4: Do you accept custom orders for wholesale distributors?

Yes. We support full customization – width, thickness, fiber density, neutral export packaging, and private OEM labels. Send your specifications to our sales team for a tailored quote.

Q5: What's the lead time for bulk orders?

Standard production takes approximately 30 days after deposit confirmation. For extra-large shipments, we can adjust schedules to match your market stocking plan – contact us to discuss.

Q6: Is basalt exhaust wrap better than traditional fiberglass wrap?

Yes – in three key ways:

Higher peak temperature tolerance – performs better under sustained high heat

No itchy fiberglass fragments – cleaner, more comfortable installation

Longer anti-aging performance – resists crumbling and degradation over time

For performance auto and industrial heat insulation, basalt is a premium upgrade over fiberglass.

Ready to Order – Wholesale & OEM Inquiries Welcome

We supply this 2"x50' Titanium and Black Blended Exhaust Wrap in bulk to distributors, modification shops, and industrial brands worldwide.

Customization options:

Width and thickness adjustments

Fiber density tuning

Neutral or private-label packaging

OEM labeling

Wholesale support:

Large-batch order fulfillment

Sample support for serious buyers

Flexible scheduling for extra-large shipments

Get a bulk quote – send your requirements to our sales team. We'll respond with pricing, lead time, and sample availability.

Email: admin@jwautopart.com

Tel: +86-13968248530